CNC Boat Kits and Prep for the Maine Boatbuilders Show

It has been very busy as evidenced by fewer postings. We have launched a new website for the CNC Boat Kit business www.CNCboatkits.com

ClintChaseBoatbuilder.com will feature the boatbuilding, mast and spars, and oars work.

One of the most important details in a good CNC kit is working out the NC scarf. Here is a CNC router cutting some test scarfs.

 

The router above is using a 1/4" bit to follow lines of code generated by computer software. The code is specific to a .dxf file for the part, in this case a scarf joint.

 

The dogbone shape you see is the key, literally, in that it locks the scarf together and aligns the entire plank. When a builder receives a kit, all the planks are precut to the precise spile and sweep of the plank but it short segments. To preserves the proper shape, this NC scarf needs to be right on the money.

 

The beauty of this scarf is that it is blind, covered up by the outside plys so that it is not seen from the outside. This would be especially important for varnished planks.

We are very busy getting ready for the 2010 Maine Boatbuilders Show in less than a week! We will be in building #2 on the left as you enter from the main entrance direction.

Read More..

Maine BoatBuilders Show

Here is a boat moving in for the Show....it is that time of year again. The Maine Boatbuilders Show started Fri and tomorrow is day 3 already. This year has been a good show so far and tomorrow should bring even more interest. People are really intrigued by what I have to offer, a couple dozen truly unique boat kit designs most of which are available only through CCBB!

This is the first time a Goat Island Skiff has been displayed at a US boat show as far as I can tell and people are loving the boat. My boat is still unpainted, but there are always a few boats at this show that are in progress, which makes it a lower key boat show. The philosophy behind this show is that it is a boatbuilders show. People talk to the boatbuilders not reps and, in the case of an unfinished boat, get a rare glimpse into the workings of a boatbuilder, work that is normally inside a shop until it is all painted.

Lastly, we are live on FACEBOOK and TWITTER. Like us on Facebook

www.facebook.com/clintchaseboats

www.twitter.com/clintchaseboats

Read More..

Wooden Boat Show Family Boat building

We are catching up with a nons stop summer of boating events and where best to start the series of updates than with the Wooden Boat Show in Mystic, CT. In 2 1/2 days, a father son duo built one of our Echo Bay Dory Skiff kits. They discovered that there is a lot of boatbuilding, sweat, creativity and work to do even starting from a kit.

 

They launched on the third day at 3pm. They were very proud and perhaps glad they had a break to enjoy their success. My former life was a teacher and instructing people to build their own boats. Getting new folks into small boats, building their own boats from kits, and experiencing success in everyway is the number one priority for our customers. Likewise, we felt this years Family Boatbuilding was a success and will plan to do these boats again next year.

 

Read More..

Family Boatbuilding at Wooden Boat Show

We (myself, Christophe Matson, Eric Risch the designer of the EBDS, and Steven Bauer) had a wonderful time guiding three wonderful families through the construction of 3 beautiful Echo Bay Dory Skiffs this past Friday through Sunday. The skiffs were all made from precut kits, allowing for the quick, efficient construction.

Day 1 was assembling hull sides.

Day 2 was attaching chine logs, gunwales and bottoms.

Day 3 was installing seats and outerkeel as well as doing some shaping and sanding.

Then all 3 familes launched their creations. In fact, out of nearly 30 boats built at the Show, we were the only 3 that launched!

Not one boat leaked. One family rowed across the river to their home and the others loaded on the cartops to drive home to New Jersey and Colorado. They will receive sailing kits to complete their boats.

Big thanks to Wooden Boats support of Family Boatbuilding, to Eric Risch for giving us the design rights to use this boat, and to Christophe Matson for his patient skilled help with the families. Finally, thanks to the families for signing up with us. It was a blast, especially seeing you all rowing on Sunday.

Read More..

Wooden Boat Show

Summer heat is setting in and minds are turning to activities that can keep us cool. Time for us to get out on the water and go boating.

Time also for the Wooden Boat Show, which takes us north on a 500 mile road trip from the rapidly over-heating Virginia to the somewhat cooler climes of New England, more particularly the very beautiful Mystic Seaport. I must admit that in June/July I think that part of Connecticut must be a great place to live. Then I think about how much I dislike the (much milder) cold of a Virginia winter and know that I was built for much more tropical places.

The Wooden Boat Show  will be 26-28 June and we will once again be exhibiting our bright yellow Paper Jet prototype. Close by, in the "I Built It Myself" section, will be the prototype of our new 16ft garvey design. This is "Inlet Runner", exhibited by amateur builder Kevin Agee of Hampton, Virginia. He is working long hours into the night to get it finished in time for the show. It will be showing off its very fresh paint job. Never having built a boat of any size or type before, he has surprised himself with the high standard of work that he has achieved.

Kevin Agees "Inlet Runner" 16ft garvey nearing completion.

We are also using this opportunity to do the official launch of my new book "South Atlantic Capsize - Lessons Taught by a Big Ocean Wave". We will have copies on hand at a special show price and you may be able to pin me down long enough to sign your copy. Special show price only to those who visit us at the show.

To see more about our boat designs, please visit our main website or our new mobile website.

Read More..

Inlet Runner at the Wooden Boat Show

This time last week we were in Connecticut,  participating in the 24th annual Wooden Boat Show at Mystic Seaport. We drove there with two boats in tow, the Paper Jet prototype that we have exhibited the past few years, and the prototype of our new Inlet Runner 16 garvey powerboat design. Sorry, no hyperlink for that one yet, I am still working on the design package.

Paper Jet and Inlet Runner 16 nested for long-distance travels.

The Inlet Runner was built by Kevin Agee and exhibited by him in the "I Built it Myself" section of the show. As a first-time amateur boatbuilder with little woodworking experience, he made such a great job of his project that he took 2nd place in the amateur-built powerboat division, winning the Honourable Mention Award. Congratulations to Kevin for a job well done. I helped out at the end of the project with a bit of sanding but Kevin did everything else himself.

Inlet Runner in the "I Built it Myself" section of the Wooden Boat Show.

The Inlet Runner has my interpretation of a classic garvey hull.

 The Inlet Runner received a lot of interest and we have a few builders waiting for completion of the plans. Also a few requests for both bigger and smaller versions of the same concept. Watch for those on this blog in the next year or two but they must wait in line behind other projects that are currently in progress.

This boat has side seats aft and foredeck with lockers under for stowage, icebox, bait well etc. It also has a self-draining wet deck that can be left clear for fishing space or fitted with a swivel seat for flat-water fishing. We will also offer a Jonboat format with transverse seats and a centre console format on the wet deck.

Deck layout of Inlet Runner, set up for flat water fishing.

Overall, a successful show for us. Thank you Wooden Boat Publications, for organising this show for the benefit of lovers of wooden boats of all types. I look forward to being there again in 2016.

To see our full range of designs, please visit http://dixdesign.com or, for the mobile viewers, http://dixdesign.com/mobile

Read More..

Maine BoatBuilders Show Links

The final verdict is still out, but I feel it was a good show. The weather was too nice on Saturday so attendance was low. Today compensated for this with a steady stream of people and a higher than normal attendance. Friday and today were the best days.

Here are some pictures care of Maine Boats Homes and Harbors.

Read More..